CFFA3000 Project Definition

• A CompactFlash / USB flash drive interface for Apple II family of computers
• Support 1 to 13 partitions under ProDOS and GS/OS, and 2 virtual floppy drives
• Virtual Floppy image support allows the use of almost any non-copy-protected floppy disk image, including .dsk, .2mg, and .nib files. Note: .nib files of protected floppies will not work with the CFFA3000
• Allows storage of thousands of floppy and smartport disk images
• User configurable partition count
• Boot from either device and any partition
• Allow booting from Dos3.3, Pascal, CPM, Contiki, ProDOS or GS/OS directly from the Interface card (for a floppy-less system)
• Configurable as a CFFA smart port controller (i.e. a mass storage device) or as a floppy controller, or both. When configured as both, requires 2 slots in your Apple II, one for the physical card, and one for the virtual floppy controller.
• Hardware supports DMA, although v1.0 software does not currently support DMA. Future support is planned, but not guaranteed.